Leak symptom guide
How to Check Your Water Meter for a Leak
A controlled meter check can show that recorded water use continues when the home should be idle. It cannot identify the exact pipe, room, or repair by itself.
- Since 2009
- License #929609
- Detection and repair
- Six counties served
Short answer
What this symptom can mean
Turn off faucets and known water-using fixtures and appliances, record the meter display or indicator, use no water for about 30 minutes, and check again. Movement suggests water passed through the meter during the test.
What to look for
Details that make the symptom more meaningful
- The low-flow or leak indicator continues moving
- The digital reading increases during the no-use period
- The meter stops only after a building or branch shutoff is closed
- The result repeats under the same controlled conditions
More than one possible source
Conditions that can look similar
- Running toilet or fixture
- Water treatment or appliance cycle
- Irrigation or exterior use connected after the meter
- Hidden interior, slab, service-line, or yard leak
Research safely
Checks to complete before the appointment
These observations can help the technician choose the right starting point. Stop if the area involves gas, electricity, an unstable ceiling, or another immediate hazard.
- Tell everyone at the property not to use water during the test.
- Turn off faucets and pause known water-using appliances without disconnecting safety equipment.
- Photograph or write down the meter reading and time.
- Wait about 30 minutes without using water, then compare the reading.
- If it moved, check toilets and known fixtures before assuming the leak is under the slab.
From first sign to solved pipe
A clear path from symptom to service
Recognize the symptom
A warm floor, high bill, moving meter, moisture, odor, or running-water sound creates a reason to investigate.
Separate the possible sources
Safe first checks help distinguish water, drain, gas, irrigation, appliance, or building-envelope issues.
Confirm the line and options
Professional testing narrows the affected system so repair, reroute, and repipe can be compared fairly.
Review the written scope
Pricing, access, materials, patching, permits, and exclusions should be understood before work begins.
Schedule detection or repair
Call or send the property address, symptom, and preferred time to start the correct service.
Clear answers
Questions about this leak symptom
Does meter movement prove a slab leak?
No. It supports active metered water use, but the cause may be a toilet, irrigation, appliance, service line, wall pipe, or slab line.
What if the meter does not move?
Intermittent leaks, drain leaks, roof or rain intrusion, condensation, and moisture from another source may not move the water meter during the test.
Can you isolate where the leak is after the test?
Yes. A professional can use accessible shutoffs, system checks, and detection methods to narrow the affected side or line.
Next useful step
Related leak detection resources
Take the next step
Tell us what you are noticing
You do not need to diagnose the pipe before calling. Send the property address, symptom, and preferred appointment time so we can route the correct service.
Call for active leaks or fast scheduling(888) 603-757824/7 emergency response